WESTON GARAGE FLOORS(786) 741-7667

Weston Cost Guide

Garage floor coating cost in Weston, FL: priced at estate scale

The garage floor coating cost in Weston starts with a bigger slab than most of Broward — so this guide prices by the bay, not just by the square foot, and lists the planning lines (prep, joints, moisture) that separate an honest quote from a teaser.

Mirror-gloss coated floor reflecting a collector car — the finish class a Weston cost quote covers
A high-gloss coated-floor finish example — not a Weston job, and not presented as one. Illustrative stock photography.

Price by garage size

Flake system with polyaspartic topcoat at $6–$12 per sq ft. Run your exact footage in the cost calculator.

GarageTypical sizeFlake + polyaspartic range
2-car~450 sq ft$2,400–$6,000
3-car~675 sq ft$4,000–$8,100
4-car~900 sq ft$5,400–$10,800
Oversized / tandem1,000+ sq ftQuoted per project after measurement

Where the money goes on a big floor

Preparation at scale

Diamond grinding a 675 sq ft slab is real machine time — and it is the line that decides whether the coating is still bonded in year ten. Quotes that make prep disappear make the warranty disappear with it.

Joints & cracks

More bays mean more control joints. Whether joints are filled flush, left as honest saw cuts, or treated flexibly is a design decision with a price attached — get it in the written plan.

Moisture

Florida's #1 failure cause does not care how nice the house is. A moisture reading precedes any honest quote; mitigation, when the reading requires it, runs roughly $1.50–$3.00 per sq ft.

Finish tier

Flake is the value-premium standard. Metallic epoxy adds pigment artistry and cure time at roughly $8–$12 per sq ft. High-gloss solids demand a flawless slab and show every imperfection — priced accordingly.

Weston cost questions

What is the garage floor coating cost per square foot in Weston?

For the professional standard — epoxy base, decorative flake, polyaspartic topcoat — plan on roughly $6–$12 per sq ft installed. A full polyaspartic system sits in the same band; 100% solids epoxy runs about $5–$7 per sq ft; metallic designer finishes run about $8–$12 per sq ft and are usually quoted per project.

What does a 3-car garage floor coating cost in Weston?

A typical Weston 3-car garage is about 600–700 sq ft, so the flake-and-polyaspartic standard lands around $4,000–$8,100 before any add-ons. Moisture mitigation, when a slab tests wet, adds roughly $1.50–$3.00 per sq ft; removal of an old coating adds a similar range.

How does the epoxy garage floor cost in Weston compare with polyaspartic?

Basic epoxy is the cheapest line on the sheet (about $3–$5 per sq ft) and the first to yellow at the door line and soften under hot tires. The hybrid flake system most Weston homes choose prices in the $6–$12 band and buys the UV stability and cure speed that make a big garage usable again in about a day.

Why is my 2-car quote higher than my neighbor's?

A 2-car garage floor coating cost in Weston varies with preparation more than with finish: grinding, crack and joint work, and moisture findings move the number. Two quotes $1,000 apart on the same garage usually differ on prep — ask each installer to itemize it.

Is this guide a quote?

No. These are planning ranges from public South Florida installer pricing. Your price is confirmed on site by the participating installer, after measurement, prep assessment, and a moisture reading.

Call (786) 741-7667Get an Estimate